|
|
Licentiate thesis
/ 1982 - 1996
|
|
|
| 1982:01 | Nyberg, Leif: Estimering av
styckefallsfördelningar med automatisk bildanalys: utveckling av ett hjälpmedel för
utvärdering av bergsfragmentering |
| 1983:04 | Rönnbäck, Stefan: Lasthantering med fartygskranar |
| 1984:01 | Larsson, Hans: Modelling of bolt action in jointed rock |
| 1984:02 | Gustafsson, Göran: The focused shock technique for producing transient water jets |
| 1984:03 | Gustafsson, Thomas: Tillämpningar av rekursiv estimering |
| 1984:04 | Finnström, Marie: Jet formation in
liquid impact |
| 1984:05 | Zhai, Hongxin: The influence of
autogenous grinding on the liberation of particles |
| 1984:06 | Sarady, Istvan: Riktning av
fartygsprofiler i rullriktverk |
| 1984:07 | Berglund, Göran: Presshärdning av borstål: utveckling av presshärdningstekniken till verkstadsmässighet |
| 1984:09 | Ludvig, Bengt: Skjuvtester på bergbultar
|
| 1984:10 | Lundberg, Jan: Studium av obliteration
och viskositet: obliteration av vattenbaserade hydraulvätskor och mineraloljor samt viskositet
t˙för emulsioner vid plan Poiseuille strömning |
| 1984:11 | Lindvall, Bengt: Användarkrav på väg- och gatuutrymmen: en kalkylmodell för beräkning av optimal jämnhetsstandard |
| 1984:12 | Fransson, Lennart: Bärförmåga hos ett flytande istäcke: beräkningsmodeller och experimentella studier av naturlig is och av is
förstärkt med ärmering |
| 1984:13 | Hanse, Harry: On a finite element method
for estimating the penetration of frost in ground: discussion and numerical experiences |
| 1985:01 | Schefström, Dick: On data organization in
programming environments |
| 1985:02 | Kassfeldt, Elisabet: The influence of
back-up rings and rubber compressibility on hydraulic cylinder seal performance |
| 1985:03 | Häggblad, Hans-Åke: Constitutive
modelling of hard metal powder |
| 1985:04 | Andersson, Christer: Regional
strukturgeologisk tolkning av fjärranalysdata |
| 1985:05 | Ryk, Lennart: Kolvariationer och
leveransuppföljning |
| 1985:06 | Esensjö, Sören: Bergborrning med
kontrollerad hålkrökning: simulering och försök till praktisk lösning |
| 1985:07 | Närfelt, Kjell-Håkan: Software
development environments |
| 1985:08 | Mäki, Kenneth: The influence of
discontinuities on rock fracturing and damage from blasting |
| 1985:09 | Åberg, Alf: Mutagena effekter av
thiokarbanater |
| 1985:10 | Oldenburg, Mats: Finite element analysis
of tensile fracturing structures |
| 1985:11 | Emborg, Mats: Temperature stresses in
massive concrete structures: viscoelastic models and laboratory tests |
| 1985:12 | Knutsson, Sven: Thermal properties of
bentonite based barriers: theoretical considerations and laboratory tests with special
reference to the Buffer Mass Test in Stripa mine |
| 1985:13 | Herdocia, Alvaro: Shear tests of
artificial joints |
| 1986:01 | Sandkvist, Jim: Brash ice behaviour in
frequented ship channels |
| 1986:02 | Singh, Upendra K.: Simulation of strain
softening behaviour of brittle rock: a continuum damage mechanics approach |
| 1986:03 | Westerström, Göran: Estimating urban
snowmelt runoff by the temperature index approach |
| 1986:04 | Lagerkvist, Anders: Om nedbrytnings- och
transportprocesser i avfallsupplag |
| 1986:05 | Helle, Aino: Mathematical modelling of
the densification of metal and ceramic powders during hot isostatic pressing |
| 1986:06 | Nordqvist, Anders: Application of
ultrasonic cross-hole seismics to hard rock conditions |
| 1986:07 | Sinkala, Thomson: Phenomena of rock dependent drill hole deviations: a field study |
| 1986:08 | Engelmark, Helene: Infiltration och
avrinning under snösmältningsperioden: fältobservationer och numeriska simuleringar |
| 1986:09 | Nordell, Bo: Borrhålsvärmelager: förstudie och fältförsök |
| 1986:10 | Hakami, Hossein: Gauged sleeve for
controlled testing of rock |
| 1986:11 | Pålsson, Bertil I.: Modelling the pulp
chemistry of sulphide froth flotation |
| 1986:12 | Bjarnason, Bjarni: Hydrofracturing rock
stress measurements in the Baltic shield |
| 1986:13 | Olsson, Lennart: Parametrisk
signalbehandling med mekaniska och akustiska tillämpningar |
| 1986:14 | Rydén, Clas-Göran: Pore pressure in
thawing soil |
| 1986:15 | Johansson, Börje: An implementation of
Milner's CCS with a polymorphic type system |
| 1986:16 | Banda, S. M. Herath: A fundamental study
of cake filtration |
| 1986:17 | Ari, Aysen E: Multilevel approaches to
production and inventory control |
| 1987:01 | Ivansson, Sven: Applications of seismic
tomography to geophysical exploration |
| 1987:02 | Zhong Zhihua: On numerical procedures for
contact problems |
| 1987:03 | Martinsson, Olof: Bispbergs järnmalmsfält: en geologisk och geokemisk studie |
| 1987:04 | Gren, Per: Structured surfaces and
turbulence |
| 1987:05 | Martinsson, Evy: Lainijaurintrusionens
geokemi: en geokemisk studie av sidoberget till Lainijaur Ni-Cu malm |
| 1987:06 | Yi, Xiaoping: Fracture toughness and crack growth in short rod specimens of rocks |
| 1987:07 | Söderlund, Monika: Water film solar
collectors: solar heat from asphalt and roof surfaces |
| 1987:08 | Karlsson, Lars: Efficiency of a
percussive process for fragmentation of rock and similar materials |
| 1987:09 | Hjalmarsson, Christer: Effektbehov i
bostadshus: experimentell bestämning av effektbehov i små- och flerbostadshus |
| 1987:10 | Ljunggren, Christer: Determination of
virgin rock stresses by fracturing methods |
| 1987:11 | Alm, Irma: Effects of biased mass media
exposures on recall and ability to separate sources of information |
| 1988:01 | Vagenas, Nikolaos: Remote-controlled/automatic load-haul-dump (LHD) system in underground mining |
| 1988:02 | Nie Shu Lin: New hard rock fragmentation
formulas based on model and full-scale tests |
| 1988:03 | Fällman, Ann-Marie: Water quality
simulations for tailings ponds in cold regions |
| 1988:04 | Gard, Gunvor: Physical strain and
musculoskeletal disorders among crane couplers |
| 1988:05 | Häggkvist, Kenneth: Numerisk modellering
av strömningsförhållanden över horisontellt homogena ytor med stora råhetselement |
| 1988:06 | Paul, Sudhir: Some model experiments in
Turam |
| 1988:07 | Falemo, Bengt: Resurskanalisering till företag via externa personer |
| 1988:08 | Salehi-Sangari, Esmail: Industrial buying
behavior in developing and industrialized nations |
| 1988:09 | Ylinenpää, Håkan: Företagstillväxt: en studie av orsaker till tillväxt i små och medelstora tillverkande företag i en perifer region
|
| 1988:10 | Järvinen, Jouko: Turismutveckling: en studie ur företagsledningens perspektiv |
| 1988:11 | Hakami, Eva: Water flow in single rock joints |
| 1988:12 | Forsgren, Nils-Olof; Schelén, Olov: An interactive proof system for test congruence between processes |
| 1988:13 | Wiklund, Urban: Algorithms for navigation
of autonomous guided vehicles: based on measurements of directions to identical beacons |
| 1988:14 | Persson, Leif: Quasi-radial solutions of
the p-harmonic equation in the plane and their stream functions |
| 1989:01 | Kumar, Uday: Maintenance strategy for
mechanized mining systems: a reliability analysis based approach |
| 1989:02 | Morris, Janine M.: An approach to an on-board vehicle monitoring system for load-haul-dump (LHD) machines |
| 1989:03 | Lindmark, Per: Jord- och vattenförorening
vid avfallsupplag |
| 1989:04 | Huang Fugen: Split flotation of calcite
from wollastonite and microcline Jokkmokk calcite rich wollastonite ore |
| 1989:05 | Dahl, Jan: Short term water heat storage: experimental study of temperatures and velocities |
| 1989:06 | Hermansson, Roger: Short term water heat storage: an experimental investigation of thermal stratification |
| 1989:07 | Gao Ming-wei: Scale-up and simulation of
tumbling mills |
| 1989:08 | Brenner Wallius, Eva: Coping with stress
in a school and office environment: self reported stress and coping behaviour for teachers and
administrative assistants |
| 1989:09 | Väppling, Lennart: Slurry transport of
ores and industrial minerals by centrifugal pumps: an experimental investigation in a
horizontal pipe-loop |
| 1989:10 | Andersson, Ulf: Trajectory estimation and
control of autonomous guided vechicles |
| 1989:11 | Almgren, Torgny: Time planning under
uncertainty in a mining environment |
| 1989:12 | Beccu, Rainer: Dissipation in drill rod
joints |
| 1989:13 | Andreasson, Patrik: Open channel flow of
hyperconcentrated suspensions: viscous effects and aspects on the carrying capacity of
particles |
| 1989:14 | Troive, Lars: Numerical modelling of deformations and residual stresses in welded components |
| 1989:15 | Näsström, Mats: Experimental verification
of numerically determined residual deformations and stresses in welding |
| 1989:16 | Leth, Siv: Noise from jet nozzles used
in steel cutting |
| 1989:17 | Carlsson, Janne: Analysis of elastic
waves in rods from two-point strain measurement: extension tin non-uniform systems and
applications to bit-rock interaction and rotational mobility |
| 1989:18 | Perzon, Håkan: Företagsexterna
kommersialiseringsförsök |
| 1990:01 | Eriksson, Mikael: Linné: an object
oriented language with parallelism |
| 1990:02 | Svanstedt, Nils: Homogenization of some
scales of partial differential equations |
| 1990:03 | Daichao Sheng: Numerical modelling of
frost and thaw penetration |
| 1990:04 | Wirstam, Hans: A probabilistic decision
model for ore charcterization and mine planning (Ramp location) |
| 1990:05 | Savilahti, Tomas: Testing and modelling
of rock joints |
| 1990:06 | Täljsten, Björn: Förstärkning av
betongkonstruktioner genom pålimning av stålplåtar |
| 1990:07 | Ohlsson, Ulf: Fracture mechanics studies
of concrete structures |
| 1990:08 | Schunnesson, Håkan: Drill process
monitoring in percussive drilling: a multivariate approach to data analysis |
| 1990:09 | Löfqvist, Torbjörn: Time dependent flow
around spherical particles and in porous media |
| 1990:10 | Li Chunlin: Fracturing and acoustic
emission (AE) of rock materials |
| 1990:11 | Stehn, Lars: Fracture toughness of sea ice: development of a test system based on shevron notched specimens |
| 1990:12 | Farhang Haeri, Manucher: Foreign market
entry strategy: behaviour of Swedish companies in the Middle East |
| 1990:13 | Asnafi, Nader: Aluminiumplåts formbarhet
|
| 1990:14 | Zheng Tan: Computational analysis of
stress and strain in sheet metal formning |
| 1990:15 | Ödeen, Sven: Two problems of viscoelastic
impact: prediction of impact force and identification of complex modulus |
| 1990:16 | Johansson, Lars: Geomechanical properties
of tailings: a study of backfill materials for mines |
| 1990:17 | Rutqvist, Jonny: Modelling and field
testing of coupled hydromechanical behaviour of rock joints |
| 1990:18 | Baotang Shen: Theoretical and numerical
study of jointed rock mass behaviour |
| 1990:19 | Boström, Staffan: Förspända skruvar i
skuvförband: förspänningsmetoder och utmattningshållfasthet |
| 1990:20 | Lagerqvist, Ove: Svetsning i kyla: svetsförbands mekaniska egenskaper vid statisk belastning |
| 1990:21 | Sundqvist, Jan: On optimal linear
estimation with association uncertainties |
| 1990:22 | Yang Qi-Xing: Erosion of refractory by
gas injection |
| 1991:01 | Åström, Henrik: Rheological and
elastohydrodynamic properties of lithium, lithium complex and sodium soap greases |
| 1991:02 | Sundin, Anders: Accuracy and reliability
of plane hybrid mixed elements for two-dimensional elasticity |
| 1991:03 | Vallgren, Annika: Self-adaptive solution
algorithms for non-linear structural problems |
| 1991:04 | Ivarson, Anders: Laser cutting: an
experimental and theoretical investigation |
| 1991:05 | Öhult, Leif: Hur bygga i kallt klimat?
|
| 1991:06 | Lindström, Torsten: Predator-prey systems
and applications |
| 1991:07 | Carranza, Giovanni: Geological setting
and geochemistry of epithermal gold deposits in the Libertad and the Limon Areas, Nicaragua |
| 1991:08 | Sundin, Nils-Olof: Prognosmodell för
fullborrning av tunnlar |
| 1991:09 | Forsberg, Lars: Three applications of
optical metrology in experimental mechanics |
| 1991:10 | Gonzalez, Gustavo A.: Geological
modelling based on gravity and magnetic measurements in the Northern Part of the Nicaraguan
depression |
| 1991:11 | Harrysson, Ralph: Laser drilling of
ceramic materials: energy distribution and crack development |
| 1991:12 | Nordström, Tomas: Designing and using
massively parallel computers for artificial neural networks |
| 1991:13 | Colldin, Ylva: Waterproofing of concrete bridges |
| 1991:14 | Persson, Lennart: Säljarrollen i
industriell försäljning: fallstudier i ett företag som säljer anpassade produkter |
| 1991:15 | Wargsjö, Agneta: Plastisk
rotationskapacitet hos svetsade stålbalkar |
| 1991:16 | Yanmin, Wang: Magnetic concentration of
hematite and chromite fines and ultrafines |
| 1991:17 | Wu Changming: Modelling of percussive
system of rock drills |
| 1991:18 | Chen, Gang: Talc as mineral filler in
rubber: a technique to indicate the surface activity and its influence on composite properties
|
| 1991:19 | Jirestig, Jan: Magnetic separation of
sulphide ores |
| 1991:20 | Mairena, Hector: New techniques for
planning and costs estimation concerning mechanized mining in narrow orebodies |
| 1991:21 | Westerlund, Lars: The open absorption
system: experimental study of the system and different absorbers |
| 1991:22 | Gustavsson, Jan-Olof: Estimation in non-gaussian noise and classification of welding signals |
| 1991:23 | Stensson, Annika: Nonlinear behaviour of
mechanical systems with displacement limitations |
| 1991:24 | Liu, Xiao-Yue: Oxidative pretreatment of
refractory sulphide concentrates to enhance gold extraction |
| 1992:01 | Wänstedt, Stefan: Geophysical borehole
logging applied to the location and characterisation of base metal ores |
| 1992:02 | Strömberg, Thomas: On infimal convolution
and a related operation connected to a Young-type inequality with applications |
| 1992:03 | Nyström, Mikael: Numerical modelling of
floating ice covers including anisotropy and inhomogeneity |
| 1992:04 | Bao, Shihan: Physical work load and
musculoskeletal disorders among chinese assembly workers |
| 1992:05 | Olofsson, Kenneth: Non destructive
testing of paper products and tubes using transient bending waves |
| 1992:06 | Samuelsson, Björn: New heuristics for lot-sizing and multi-echelon inventory control |
| 1992:07 | Andersson, Lena: Resource constrained
mine project scheduling using critical path method |
| 1992:08 | Eriksson, Lars G.: Sulfidjordars
kompressionsegenskaper: inverkan av tid och temperatur |
| 1992:09 | Wellander, Niklas: Mathematical and
numerical modelling of the induced polarization phenomenon |
| 1992:10 | Bartek, Alena: Sintering and post
sintering of silicon nitride materials |
| 1992:11 | Aidanpää, Jan-Olov: Two vibroimpacting
systems with amplitude constraints |
| 1992:12 | Daerga, P. A.: Some experimental fracture
mechanics studies in mode I of concrete and wood |
| 1992:13 | Nilsson, Ulla-Märta: Produktions- och
kvalitetsstyrning på markarbetsplatsen genom terrängmodellering med dator |
| 1992:14 | Östensen, Jan Ove: Elastohydrodynamic
lubrication under artic conditions |
| 1992:15 | Nilsson, Torbjörn: Nya företags
etablering på marknaden: en studie av mindre tillverkande företag |
| 1992:16 | Sjöberg, Jonny: Stability and design of
stope roofs and sill pillars in cut-and-fill and open stope mining with application to the
Zinkgruvan Mine |
| 1992:17 | Wang, De Sheng: Frazil jam evolution and
transport of low density granules |
| 1992:18 | Chen, Yi-Ching: Lagrangian discrete
parcel simulation of two dimensional river ice dynamics |
| 1992:19 | Wu Liu-Ming: Acid-base and complexation
properties of hydrous flourapatite surfaces |
| 1992:20 | Grönlund, Ulla: Quality variations in the
chain Log-Board-Blank caused by biological properties and subjective grading procedures |
| 1992:21 | Hillerström, Gunnar: Rejection of
periodic disturbances |
| 1992:22 | Ohlsson, Lars: Abrasive water jet cutting
: an experimental and theoretical investigation |
| 1992:23 | Tan, Xiangchun: Modeling of drill string
deflection for precision drilling in mines: theoretical and laboratory studies |
| 1992:24 | Stenmark, Christer: Local disposal of
storm water in cold climate |
| 1992:25 | Rylander, Leif: Tillväxt- och
riskfaktorer: starten av ett miljardföretag: en studie av snabbväxande, högteknologiska,
exportinriktade, mindre industriföretag |
| 1992:26 | Johansson, Annika: Synthesis of experts' and users' knowledge for ergonomics improvements of VDU workplaces |
| 1992:27 | Bergström, Lars: Development of three-dimensional disturbances in pipe poiseuille flow |
| 1992:28 | Olika, Bekele: Simulation of ladle lining
and steel temperature in secondary steelmaking |
| 1993:01 | Holmbom, Anders: Homogenization applied
to som problems in mechanics |
| 1993:02 | Wikström, Victoria: Influence of
temperature and oil type on traction in lubricated contacts |
| 1993:03 | Wikander, Lars: Efficient
thermomechanical finite element models for the simulation of welding |
| 1993:04 | Friborg, Johan: Multifrequency IP-measurements and parametrization of ground impedance spectra |
| 1993:05 | Edberg, Jonas: Computational modeling of
hot rolling |
| 1993:06 | Nordebo, Sven: Noise cancelling using
spatial filters in broadband adaptive beamformers |
| 1993:07 | Perdahl, Jan-Anders: Geological
diversities within the Kiruna - Arvidsjaur porphyry gorups: implications for age and facies
dependence |
| 1993:08 | Antti, Lena: Microwave drying of hardwood: potentials for moisture flux |
| 1993:09 | Ödling, Per: Low comlexity digital
receivers |
| 1993:10 | Degermark, Mikael: A model of
communicating systems with stochastic choice |
| 1993:11 | Bhongsuwan, Tripob: Palaeomagnetic
investigations in Thailand |
| 1993:12 | Forsberg, Rolf: Optimization of two-level
inventory systems with compound poisson demand |
| 1993:13 | Lundberg, Angela: Evaporation of
intercepted snow: measurement techniques and governing factors |
| 1993:14 | Holmberg, J. Anders: Tensile failure of
random fibre composites: a statistical approach |
| 1993:15 | Eriksson, Håkan: Modelling of waveform
deformation and time-of-flight estimation |
| 1993:16 | Rådberg, Gunnar: Rock mechanics
evaluation of rill mining and numerical modelling of jointed rock masses |
| 1993:17 | Kumar, Dhananjay: Reliability analysis
considering operating conditions in a mine |
| 1993:18 | Sjödahl, Mikael: An electronic speckle
photography system for in plane deformation measurements |
| 1993:19 | Edfors, Ove: On robust source codes and
fast look-up table decoding |
| 1993:20 | Hagman, P. O. G.: Prediction of wood
quality features by multivariate models based on scanning techniques |
| 1993:21 | Gabrielsson, Henrik: Shear capacity of
beams of reinforced high performance concrete |
| 1993:22 | Axelsson, Bengt: Cutting forces at a tool
edge during machining of wood |
| 1993:23 | Andersson, Lars-Olof: Ice accretion and
ice adhesion to polymer material |
| 1993:24 | Sundqvist, Åsa: Hydraulic fill transport
: flow characterization of cyclone classified tailings |
| 1993:25 | Yi, Huang: The production system analysis
of the Kiruna iron ore mine |
| 1993:26 | Lundström, T. Staffan: Permeability and
void formation in RTM |
| 1993:27 | Möller, Mikael: Some conciderations on
structural steel plasticity |
| 1993:28 | Granlund, Jan: The yield point phenomenon
of structural steel: experimental and phenomenological aspects |
| 1994:01 | Hardell, Christian: An integrated design
and analysis system for multibody systems |
| 1994:02 | Jeppsson, Peter: Integrated design,
analysis and manufacturing systems using neutral databases |
| 1994:03 | Vomacka, Peter: The role of glass in
engineering ceramics |
| 1994:04 | Asp, Leif: Fracture and yield predictions
for epoxies in composite-like stress state |
| 1994:05 | Sandell, Magnus: Spatial decomposition of
ultrasonic echoes  |
| 1994:06 | Johansson, Carin: The behaviour of light
weight wooden joist floors at low frequiencies |
| 1994:07 | Juntti, Lars: Evaluation of ordering
systems for multi-echelon inventory control |
| 1994:08 | Larsson, Roland: Lubrication at impact
loading |
| 1994:09 | Saldner, Henrik O.: Electronic holography
and shearography in experimental mechanics |
| 1994:10 | Mácsik, Josef: Risken för utfällning av
ferriföreningar ur dräneringsvatten från anaeroba och aeroba sulfidjordar |
| 1994:11 | Nilsson, Klas: Inudstrial applications of
high power CO2-laser welding |
| 1994:12 | Almqvist, Nils: Scanning probe microscopy
: applications |
| 1994:13 | Ringqvist, Lena: Pretreatment methods to
improve mechanical dewatering of fuel peat |
| 1994:14 | Grundberg, Stig: Scanning for internal
defects in logs |
| 1994:15 | Krause, Bo-Staffan: Perspektiv på
arbetsvärdering |
| 1994:16 | Carlsson, Peter: Personalfunktionens
organisering |
| 1994:19 | Viklander, Maria: Melting of urban snow
deposits: a water quality study |
| 1994:20 | Markkula, Heikki: Middagsberget: en
epigenetisk guldmineralisering i Västerbotten, norra Sverige |
| 1994:21 | Oksman, Kristiina: Interaction between
wood and synthetic polymers in wood/polymer composites |
| 1992:22 | Bai, Guohua: Feedback learning in
information systems design |
| 1994:23 | Wu, Lie: Application of statistical
energy analysis method to engine structures |
| 1994:24 | Wallström, Lennart: Wood surface
stabilization |
| 1994:25 | Viklander, Peter: Frusen jords packnings- och deformationsegenskaper |
| 1994:26 | Claesson, Lars-Åke: The geochemistry and
palaeotectonic setting of lower proterozoic metavolcanic rocks and related intrusives in the
Skellefte massive sulphide ore district, northern Sweden |
| 1994:27 | Westberg, Ulf: Applications of the PEXE-concept for maintenance policies and proportional hazards models |
| 1994:28 | Johansson, Örjan: Application of the
sound method for characterisation of engine noise sources |
| 1994:29 | Svoboda, Ales: Modelling and simulation
of hot isostatic pressing of metal powder |
| 1994:30 | Lundberg, Å. Staffan: Experimental investigations in wood machining related to cutting forces, sawdust gluing, and surface roughness |
| 1994:31 | Seger, Mikael: TPM: Total Productive Maintenance |
| 1994:32 | Zackrisson, Jesper: Produktivitet, kvalitet och arbetsmiljö: en fallstudie om lågskalig industri |
| 1994:34 | Zhang, Wen-Fa: Design and evaluation of
control policies for multi-echelon inventory systems |
| 1994:35 | Westerström, Anita: Kvinnor och datorisering: en studie i försäkringsbranschen |
| 1994:36 | Hammar, Lars: Frazil ice evolution on
open channels |
| 1994:37 | Larsson, Per-Olof: Lubricant drop formation behind an EHD contact |
| 1994:38 | Åkerlund, Elisabeth: Noise and annoyance
in working environments |
| 1994:39 | Leyton, Brenda: Geophysical studies and image analysis in Northeastern Nicaragua, Central America |
| 1994:40 | Ericsson, Stefan: Analysis of two
metapopulation models |
| 1994:41 | Wall, Peter: Optimal bounds on the effective properties of multiphase materials by homogenization |
| 1994:42 | Egnell, Per-Olof: Processledning: en
arbetsmodell samt erfarenheter från svenska organisationer |
| 1994:43 | Rodriguez, Dionisio: Geology and geochemistry of igneous rocks associated with mineral deposits in Northeastern Nicaragua,
Central America |
| 1994:44 | Gustafsson, Peter: Measurements and
magnetic flow control of magnetite ore flow and numerical simulations of granular flow |
| 1995:01 | Sundin, Eva: Atmospheric icing: failure studies and ice load predictions on masts by weather station data |
| 1995:02 | Westerberg, Bo: Lerors mekaniska
egenskaper: experimentell bestämning och kvalitativ modellering med tillämpning på lera från
Norrköping |
| 1995:03 | Lehto, Niklas: Electronic structure of
intrinsic stacking faults in silicon |
| 1995:04 | Jonsson, Ulf: Lubricant rheology in
refrigeration systems and magnetic storage devices |
| 1995:05 | Broman, Olof: Means to measure people's
attitudes towards wood |
| 1995:06 |
Bergquist, Karin:
Ergonomiska krav på skyddsskor i kallt klimat |
| 1995:07 | Ayyala, Sekhar: Influence of hydrodynamics on hydrophobic flocculation of galena |
| 1995:08 | Forsberg, Johan: Mobile robot navigation
and map generation using range measurements |
| 1995:09 | Lampa, Conny: Practical and theoretical aspects of laser welding |
| 1995:10 | Lei, Bingqiang: Mechanisms and kinetics
of reaction bonding nitridation process in silicon powder compacts |
| 1995:11 | Su, Fenwei: Surface complexation of magnetite in aqueous suspension |
| 1995:12 | Gärd, Rune: FT-IR and FT-Raman studies of
colloidal ZnS |
| 1995:13 | Yuan, Xuemin: Action of gases in control of pulp chemistry and flotation selectivity for a complex sulphide ore |
| 1995:14 | Bergman, Hans: Metanoxidation i täckskikt på avfallsupplag |
| 1995:15 | Rönnbäck, Niklas: Behovsstyrd planering
av lösa lastbärare och fordonsekipage i ett godstansportsystem |
| 1995:16 | Olofsson, S. Kurt: Filament winding of thermoset composites: process modelling and experimental verification |
| 1995:17 | Adolfsson, Stefan: Quality monitoring in
pulsed GMA welding using signal processing methods |
| 1995:18 | Eklund, Urban: Stresses in bandsaw blades used in sawmill industry |
| 1995:19 | Månsson, Anders: Development of body of
motion under controlled gravity flow of bulk solids |
| 1995:20 | Gulbrandsen, Elisabeth: The reality of our fictions: notes towards accountability in (techno)science |
| 1995:21 | Persson, Lena: An investigation of the
topographic effect and a comparison of staked an insulated receiver antennas in the VLF method
|
| 1995:22 | Khan, Shafiquzzaman: Subjective annoyance reaction to diesel and ethanol engine noise in free field conditions |
| 1995:23 | Shi, Wanqing: Assessing and modelling
impact sound insulation of wooden joist constructions |
| 1995:24 | Liu, Xiaoxiong: A method for helmet
evaporative heat transfer characteristics measurement and evaluation |
| 1995:25 | Holmberg, Kjell: Exposure to annoying
noise in working environments |
| 1995:26 | Noghabai, Keivan: Splitting of concrete in the anchoring zone of deformed bars: a fracture mechanics approach to bond |
| 1995:27 | Westman, Gustaf: Thermal cracking in high
performance concrete: viscoelastic models and laboratory tests |
| 1995:28 | Jonsson, Håkan: Guarding art galleries
with one guard |
| 1995:29 | Wolde, Begashaw: Spatial and temporal variations in the chemistry of basaltic rocks in the cenozoic Ethiopian volcanic province |
| 1995:30 | Lassinantti, Lars: Teknikupphandling: en process med företagsutvecklande effekter |
| 1995:32 | Melin, L. Gunnar: Moiré techniques for
measurement of the deformation field at crack tips in fiber composite materials |
| 1995:33 | Nilsson, Urban: Funktionsentreprenader
för vägbroar: upphandlingsmodell |
| 1995:34 | Ekerfors, Katarina: Mognadsutveckling i betong: temperaturkänslighet, hållfasthet och värmeutveckling |
| 1995:35 | Lindqvist, Stefan: Compressibility and density of lubricants in transient loading |
| 1995:36 | Gamstedt, Kristofer: Fatigue mechanisms
in unidirectional composites |
| 1995:37 | Sjögren, Anders: Failure behaviour of polypropylene/glass bead composites |
| 1995:38 | Ubieta, Karla: Geological structures at
the Southern edge of the Chortis Crustal Block, Nicaragua: a geophysical analysis |
| 1995:39 | Kennerfalk, Leif: Changes in organizational structure related to the implementation of a total quality management strategy |
| 1995:40 | Chen, Huimin: Anaerobic degradation of
carbohydrates in municipal solid waste landfill |
| 1995:41 | Hammarström, Märta: Ekonomimodeller i instrumentellt och symboliskt perspektiv |
| 1995:42 | Larsson, Ulf: Mobile robot localization
using electro-optical sensors |
| 1995:43 | Marklund, Olov: Image analysis applied in interferometry and granular motion studies |
| 1996:01 | Lindfors, Ulf: Experimental study of the
mechanics of rock joints |
| 1996:03 | Hansson, Kjell-Åke: Fartyget och
fartygsorganisationen som en komplex arbetsmiljö: om kvalitetsstyrning och säkerhet |
| 1996:04 | Engström, Hans: Theoretical and practical
aspects of laser cladding |
| 1996:05 | Hansson, Johan: The proton as a laboratory
for the fundamental structure of matter |
| 1996:06 | Deleryd, Mats: Process capability studies
in theory and practice |
| 1996:07 | Udén, Maria: Det luktar stål och olja: intervjuer med fem kvinnor som är civilingenjörer |
| 1996:08 | Karlsson, Tomas: Finite element
simulation of flow in granular materials |
| 1996:09 | Nilsson, Leif: Extraction of metals and precipitation of wastes from bioleach solutions |
| 1996:10 | Hellström, Daniel: An investigation of
components in wastewater nutrients management: natural sludge dewatering and storage of urine
|
| 1996:11 | Tinnsten, Mats: Numerical and experimental study of dynamic and acoustic behaviour of vibrating structures |
| 1996:12 | Lönnroth, Emma-Christin: Work environment
in dental clinics: risks and preventive measures when handling dental restorative materials
|
| 1996:13 | Bergman, Greger: Methods for modelling and analysis of thermo-mechanical manufacturing processes |
| 1996:14 | Beek, Jan-Jaap van de: Estimation of
synchronization parameters |
| 1996:15 | Nilsson, Annika: Analysis of metalworking processes |
| 1996:16 | Lindqvist, Anders N.: Structures in the
flow from paper machine deadboxes: a model study |
| 1996:17 | Diedrichs, Ben: Linear and non-linear growth of disturbances in channel flows |
| 1996:18 | Joffe, Robert: Matrix cracking and
interfacial debonding in polymer composites |
| 1996:19 | Legge, David Ian: Off-line programming of coordinate measuring machines |
| 1996:20 | Lindhagen, Johan: Notch sensitivity and
failure of glass mat reinforced polypropylene |
| 1996:21 | Bergman, Anders: Characterisation of industrial wastes |
| 1996:23 | Teymourian, Kiumars: Working situations
in small and medium sized enterprises: case studies in northern part of Sweden |
| 1996:24 | Veber, Pascal: Studies of the flow
pattern in short term hot water storages |
| 1996:25 | Fredriksson, Christian: Cyclone
gasification of wood powder |
| 1996:26 | Kavian Lanjani, Jaffar: Gruvarbetarnas riskhantering via säkerhetskommittéarbete: silikosproblematiken i Laisvallgruvan |
| 1996:27 | Thuvander, Fredrik: Wood cell-wall damage: a composite materials approach |
| 1996:28 | Westerberg, Mats: Does the CEO matter?: an empirical study of small firms operating in a turbulent environment |
| 1996:29 | Nilsson, Per: Anthropogenic flows of zinc
and associated metals in Sweden |
| 1996:30 | Land, Magnus: Till weathering and water
geochemistsry in northern Sweden |
| 1996:31 | Pettersson, Esbjörn: Minimization of
emissions from diesel engines: application of statistical experimental designs and
multivariate data analysis |
| 1996:32 | Du, Qing: Surface complexation in illit/water suspentions |
| 1996:33 | Abrahamsson, Lena: Organisationsförändringar och kvinnors arbeten: några fallstudier från massa- och pappersindustrin |
| 1996:34 | Zhang Guangya: Synthesis and characterization of metal substituted colloidal silicate-1 |
| 1996:35 | Runnemalm, Henrik: Modelling of welding: two extreme cases |
| 1996:36 | Tano, Kent: Multivariate modelling and monitoring of mineral processes using partial least square regression |
| 1996:37 | Groth, Patrik: Cracking in concrete: crack prevention with air-cooling and crack distribution with steel fibre reinforcement |
| 1996:38 | Hedlund, Hans: Stresses in high performance concrete due to temperature and moisture variations at early ages |
| 1996:39 | Zurita, Villarroel Grover: Multivariate
analysis and wavelet transform analysis of diesel engine combustion noise |
| 1996:40 | Edlund, Ove: Linear M-estimation algorithms in optimization |
| 1996:41 | Holmberg, N. Anders: Metal feeding in
horizontal belt strip casters |
| 1996:42 | Sörensson, Anna: The influence of high frequency and shock-type vibrations of the human hand-arm system |
| 1996:43 | Ljungberg, Johan: The geochemical
dynamics of oxidising mine tailings at Laver, northern Sweden |
| 1996:44 | Tano, Katarina: Surface reactions on - alumina studies by FT-spectroscopy |
| 1996:45 | Ekenberg, Lilly: Hur utforma sjukgymnastik för barn/ungdomar med rörelsehinder från spädbarnsålder till vuxenliv: föräldrars perspektiv |
| 1996:46 | Svensson, Bernt: In-situ test methods in district heating systems: application to heat meters and subsciber stations |
ISSN: 0280-8242 / 1982 - 1996
|
Förstasida
| In English
